85
7
Cleaning the paper path transportation nip rollers (12x)
Also clean the idler rollers
RCT Module
The feed rollers and paper path need to be cleaned regularly when in use, and if the unit
has not been used for a period of time. How often this should be done depends on the paper
type and print quality.
An increasing number of misfeeds is one indication of the need to clean the feed roller, paper
path and/or the sensors. Feed rollers and paper path are cleaned with the same cleaning agent
used to clean the printer and a lint free cloth. Sensors are wiped clean with a lint free cloth.
A problem with registration accuracy is often related to build up residual toner and paper dust.
CAUTION
Never use any cleaning uids on sensors.
WARNING
Do not put your ngers within knife protections.
Doing so may result in injury.
Nip rollers
Knife protections
To Next Page
Loading...
