POFUNG BF9500 - Voice Compander; Scrambler Setup; Channel Display Mode

BF9500 车载台使用说明书
2）Adjust the knob switch or Mic's key, and select 12 menu option, the screen display ；
3）Short press the key, enter the function menu, the screen flashing "OFF", Options are "OFF/ON"；
Set the scan skip display “★”
4）Adjust the knob switch or Mic's key choose to ON；
5）Short press the key, save and exit the Settings；
6）Setup process short press , then cancel save , and switch to the on a menu or next a menu；
7）Press to other keys , cancel the save and return to main interface.
13. Voice Compander(Optional function) 语音压扩设置(可选购功能)
Enable this function to reduce background noise and enhance audio clarity, especially in long range communication.
1）In standby mode, press and hold key to enter general setting menu；
2）Adjust the knob switch or Mic's key, and select 13 menu option, the screen display ；
3） Short press the key, enter the function menu, the screen flashing "OF", Options are "OF/ON"；
4）Adjust the knob switch or Mic's key choose to ON, the screen display ；
5）Short press the key, save and exit the Settings；
6）Setup process short press , then cancel save , and switch to the on a menu or next a menu；
7）Press to other keys , cancel the save and return to main interface.
14. Scrambler setup (Optional function) 语音加密（可选购功能）
An analog voice inversion scrambler can be equipped as optionals.This special audio process can offer a more confidential
communication.Other radios at same frequency will receive only disordered noises.
1）In standby mode, press and hold key to enter general setting menu；
2）Adjust the knob switch or Mic's key, and select 14 menu option, the screen display ；
3）Short press the key, enter the function menu, the screen flashing "OFF", Options are "OFF/ON"；
4）Adjust the knob switch or Mic's key；
5）Short press the key, save and exit the Settings；
6）Setup process short press , then cancel save , and switch to the on a menu or next a menu；
7）Press to other keys , cancel the save and return to main interface.
15. Channel display mode 信道显示类型设置
1）In standby mode, press and hold key to enter general setting menu；