POFUNG BF9500 - Microphone PF3; Microphone PF4; Pilot Frequency

BF9500 车载台使用说明书
1）Press and hold key to enter general setting menu；
2）Adjust the knob switch or Mic's key, and select 27 menu option, the screen display ；
3) Press ，the screen flashing “V/M”， Options see "PF1, PF2, PF3, PF4 function selection list", Default: “V/M”；
4) Adjust the knob switch or Mic's key to select
5）Press to confirm the selection and exit；
6）Setup process short press , then cancel save , and switch to the on a menu or next a menu；
7）Press to other keys(includes PTT) , cancel the save and return to main interface
28. Microphone PF3 手咪可编程键 PF3 设置
1）Press and hold key to enter general setting menu；
2）Adjust the knob switch or Mic's key, and select 28 menu option, the screen display ；
3) Press ，the screen flashing “RADIO”， Options see "PF1, PF2, PF3, PF4 function selection list", Default: “RADIO”；
4) Adjust the knob switch or Mic's key to select
5）Press to confirm the selection and exit；
6）Setup process short press , then cancel save , and switch to the on a menu or next a menu；
7）Press to other keys(includes PTT) , cancel the save and return to main interface
29. Microphone PF4 手咪可编程键 PF4 设置
1）Press and hold key to enter general setting menu；
2）Adjust the knob switch or Mic's key, and select 29 menu option, the screen display ；
3) Press ，the screen flashing “BATT”， Options see "PF1, PF2, PF3, PF4 function selection list", Default: “BATT”；
4) Adjust the knob switch or Mic's key to select
5）Press to confirm the selection and exit；
6）Setup process short press , then cancel save , and switch to the on a menu or next a menu；
7）Press to other keys(includes PTT) , cancel the save and return to main interface
30.Pilot Frequency 中继导频频率设置
This function uses to start repeater. It needs a certain intensity Pilot Frequency to start dormant repeater. As usual, no need
to send pilot frequency again once repeater started.
1）Press and hold key to enter general setting menu；