BF9500 车载台使用说明书
■Reset 2 完全复位方法 2
1）In standby mode, long press ，to enter general setting menu；
2）Adjust the knob switch or Mic's key, and select 32menu option, the screen display
3）Press ，the screen flashing “VFO”；
4）Press to confirm， the screen shows ，press again to confirm the reset and restart the radio，
press any key to exit.
5) Setup process short press , then cancel save , and switch to the on a menu or next a menu；
6）Press to other keys(includes PTT) , cancel the save and return to main interface
■ Maintenance 维护保养
1. General Information 一般信息
Before shipment, the products have been carried out in accordance with the technical parameters calibration and test in
factory. Under normal circumstances, mobile radio will work according to these parameters. All adjustable micro capacitor、coil
and resistance have been through the preset in the factory. Only familiar with this mobile radio and qualified technical personnel,
with the necessary test equipment to the above-mentioned micro capacitor、coil and resistance to adjust. Without factory
authorized without authorization for repair and calibration, may cause the mobile radio can’t warranty.
If the operation is proper, mobile radio can use for years without having to set-up. This section describes several routine
maintenance process, the maintenance process does not need or simply test equipment.
2. Maintain 维修
If you need to return this equipment to dealer or repair center to repair, should be packed in original packing and filling
materials, and attach a complete description about the encountered problems. Also attach your phone number, fax number,
E-mail address (if any), name and address, maintenance personnel in the survey questions may need to call you to understand
more information about the mobile radio. In general do not need to return the attachment, unless you think that have a direct
bearing accessories and maintenance problems. Please do not send component or printed circuit board only, must return the
complete mobile radio.
3. Maintenance of annotation 维修注释
Please provide the following information:
To Next Page
Loading...