Point Grey Flea3 GigE - Page 12

Point Grey Flea3 GigE Technical Reference 1 Flea3 GigE Specifications
All Flea3 GigE Models
Image Data Formats
Y8, Y16, Mono8, Mono12, Mono16, Raw8, Raw12, Raw16 (all models); RGB, YUV411,
YUV422, YUV 444 (color models)
Partial Image Modes Pixel binning and region of interest (ROI) modes
Image Processing Gamma, lookup table, hue, saturation, and sharpness
Shutter
Global Shutter; Automatic/manual/one-push/extended shutter modes
0.03 ms to 32 seconds
Gain
Automatic/manual/one-push modes
0 dB to 24 dB
Gamma 0.50 to 4.00, programmable lookup table
White Balance Automatic/manual/one-push modes
High Dynamic Range Cycle 4 gain and exposure presets
Color Processing On-camera in YUV or RGB format, or on-PC in Raw format
Digital Interface Gigabit Ethernet interface with screw locks for camera control and data
Transfer Rates 10/100/1000 Mbit/s
GPIO
8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial I/O, 1
opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins
External Trigger Modes Trigger Modes 0, 1, 3, 4, 5, 13 (FL3-GE-13S2 only), 14 and 15
Synchronization Via external trigger or software trigger
Image Buffer 32 MB frame buffer
Memory Channels 2 memory channels for custom camera settings
Flash Memory 1 MB non-volatile memory
Dimensions 29 mm x 29 mm x 30 mm excluding lens holder, without optics (metal case)
Mass 38 grams (without optics)
Power Consumption 12-24 V, <2.5 W, via GPIO
Machine Vision Standard GigE Vision v1.2
Camera Control via FlyCapture SDK, or GigE Vision third party software
Camera Updates In-field firmware updates
Lens Mount C-mount (FL3-GE-13S2 also available with CS-mount)
Temperature Operating: 0° to 45°C; Storage: -30° to 60°C
Compliance CE, FCC, RoHS
Operating System Windows 7, Linux Ubuntu
Warranty 3 years
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
2