Point Grey Flea3 GigE - Camera Firmware Management

Point Grey Flea3 GigE Technical Reference 4 Flea3 GigE Physical Interface
4 Flea3 GigE Physical Interface
4.1 Flea3 GigE Physical Description
1. Lens holder (C-mount)
See Lens Mounting
2. Glass/IR filter system
See Dust Protection and Infrared Cut-Off
Filters
3. M2x2.5 mounting holes
See Mounting with the Case or
Mounting Bracket
4. General purpose I/O connector
See and Input/Output Control
5. Status LED
See Status Indicator LED
6. GigE connector
See Ethernet Connector.
7. M2x2.5 mounting holes
8. M3x2.5 mounting holes
SeeMounting with the Case or Mounting
Bracket
9. Camera label
Contains camera information such as model
name, serial number and required compliance
information.
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
19