Point Grey Flea3 GigE - Determining Firmware Version; Upgrading Camera Firmware

Point Grey Flea3 GigE Technical Reference 5 General Flea3 GigE Operation
5.5.1 Determining Firmware Version
To determine the firmware version number of your camera:
n In FlyCapture, open the Camera Control dialog and click on Camera Information.
n If you're implementing your own code, use flycaptureGetCameraRegister().
n Query the GenICam feature DeviceFirmwareVersion.
5.5.2 Upgrading Camera Firmware
Camera firmware can be upgraded or downgraded to later or earlier versions using
Before upgrading firmware:
n Ensure that FlyCapture2.dll is installed in the same directory as UpdatorGUI3.
n Download the firmware file from the Point Grey downloads site.
To upgrade the firmware:
1. Start Menu-->All Programs-->FlyCapture2 SDK-->Utilities-->UpdatorGUI
Do not disconnect the camera during the update process.
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
30