Point Grey Flea3 GigE - Configuring Camera Setup; IP Address Configuration

Point Grey Flea3 GigE Technical Reference 1 Flea3 GigE Specifications
1 Flea3 GigE Specifications
The fully redesigned, next generation Flea3 camera series builds on the success of the ultra-compact Flea2 by adding
new Sony image sensors to the line-up. The Flea3 also offers a host of new features, including enhanced opto-isolated
GPIO; an on-camera frame buffer; non-volatile flash memory for user data storage; new trigger modes; and improved
imaging performance.
1.1 Flea3 GigE Specifications
Model Version MP Imaging Sensor
FL3-GE-03S1C-C
FL3-GE-03S1M-C
Color
Mono
0.3 MP
n Sony ICX618 CCD, 1/4", 5.6 µm
n Global Shutter
n 120 FPS at 648 x 488
FL3-GE-03S2C-C
FL3-GE-03S2M-C
Color
Mono
0.3 MP
n Sony ICX424 CCD, 1/3", 7.4 µm
n Global Shutter
n 82 FPS at 648 x 488
FL3-GE-08S2C-C
FL3-GE-08S2M-C
Color
Mono
0.8 MP
n Sony ICX204 CCD, 1/3", 4.65 µm
n Global Shutter
n 31 FPS at 1032 x 776
FL3-GE-13S2C-C
FL3-GE-13S2M-C
Color
Mono
1.3 MP
n Sony ICX445 CCD, 1/3", 3.75 µm
n Global Shutter
n 31 FPS at 1288 x 964
FL3-GE-14S3C-C
FL3-GE-14S3M-C
Color
Mono
1.4 MP
n Sony ICX267 CCD, 1/2", 4.65 µm
n Global Shutter
n 18 FPS at 1384 x 1032
FL3-GE-20S4C-C
FL3-GE-20S4M-C
Color
Mono
2.0 MP
n Sony ICX274 CCD, 1/1.8", 4.4 µm
n Global Shutter
n 15 FPS at 1624 x 1224
FL3-GE-28S4C-C
FL3-GE-28S4M-C
Color
Mono
2.8 MP
n Sony ICX687 CCD, 1/1.8", 3.69 µm
n Global Shutter
n 15 FPS at 1928 x 1448
FL3-GE-50S5C-C
FL3-GE-50S5M-C
Color
Mono
5.0 MP
n Sony ICX655 CCD, 2/3", 3.45 µm
n Global Shutter
n 8 FPS at 2448 x 2048
All Flea3 GigE Models
Imaging Performance
(EMVA 1288)
See the Imaging Performance Specification, which includes quantum efficiency,
saturation capacity (full well depth), read noise, dynamic range and signal to noise ratio.
A/DConverter 12-bit
Video Data Output 8, 12, 16 and 24-bit digital data
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
1