Point Grey Flea3 GigE Technical Reference 1 Flea3 GigE Specifications
To reduce heat, use a cooling fan to set up a positive air flow around the camera, taking into consideration the following
precautions:
n Mount the camera on a heat sink, such as a camera mounting bracket, made out of a heat-conductive material
like aluminum.
n Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive material like
plastic.
n Make sure the camera has enough open space around it to facilitate the free flow of air.
To access temperature information use:
n GenICam—Device Control
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
4
To Next Page
Loading...
