19
4.6 Watch
4.6.1 Dual watch
Press Watch key to activate the DUAL WATCH mode. Monitor the current
channel and Ch 16 in cycle. Icon “DU” will appear on the LCD.
4.6.2 Tri-Watch
Press and hold Watch key to activate the TRI WATCH mode. Monitor the
current channel, CH 16 and CH 9 in cycle. Icon “TRI” will be turn ON
To quit the mode, press WATCH, 16, DSC/MENU, CANCEL key,
Press PTT key to TX mode of current channel
4.7 Position indication
Your transceiver can display the position of the vessel’s (longitude and latitu-
de) as well as time and data information, if connected to a GPS receiver; if
no GPS equipment to be connected,an alert tone of 1-minute duration witch
can cancelled By any button is sounded at 4 hour intervals to encourage
manual input of positional data . Once no manual input is made for 23.5
hours, GPS disappears from the screen, the position data transmitted goes to
9’s and all the time data goes to 8’s.
DISTRESS
23’20.1234 N
100’15.1002 E
08:10 UTC
To Next Page
Loading...
