22
5.2.1 Sending a distress Call
Note: Only having a MMSI code of your radio and DSC enable, can you initiate a
DSC transmission. To enter the MMSI code see6.9.1.
1 Aprire la protezione con etichetta rossa DISTRESS.
2 Premere il tasto DISTRESS brevemente.
L’area dello schermo indicherà la natura della richiesta di soccorso.
DISTRES CALL
>UNDESIG
FIRE
FLOODING
DISTRES CALL
COUNTING
DOWN…
DISTRES SENT
AWATTING ACK
AUTO
RETRANSMIT
3 If time is available, rotate the CH knob to select the Nature of Distress, the
default are “UNDEFINED”.
4 Hold down the DISTRESS key for more than 3 seconds ,until you see the
distress call sent message on the screen. The whole display screen flash and
beep loudly.
5 If DISTRESS button is released before 3 seconds, the initiation of distress
call is not taken into effect and If button is pressed for more than 3 seconds,
DISTRESS call is sent whether channel 70 is busy or not. When Distress is
sent, the acoustic alarm goes to a continuous tone until acknowledgement
received or the DISTRESS call is cancelled.
6 during the distress call sequence, the radio simultaneously watches Channel
70 for a DSC acknowledgement and Channel 16.
7 when the distress call is acknowledged, the acoustic alarm stops and the
radio returns to normal operation on channel 16, with high power relay to
the connected station via the microphone
8 If no acknowledgement is received, the unit retransmits the DISTRESS call at
random intervals of 3.5 to 4.5 minutes until a response is received or the call
is manually cancelled, by pressing CANCEL button for twice.
5.2.2 Send an All Ships Call
1 Press DSC /MENU key. Rotate the CH knob to select “ALL SHIPS”. Press the
CH knob to enter ALL SHIPS. The All Ships menu displays LCD the categories
from which you can select
2 Rotate the CH knob to select: SAFETY, press the CH knob to enter All Ships
Safety send. CH per confermare l’invio a tutte le barche.
ALL SHIPS
>URGENCY
SAFETY
ALL SHIPS
SAFETY
>SEND
CANCEL
PRIORITY CH
21’22.0012N
120’40.1001E
10:15 UTC
To Next Page
Loading...
