POLMAR Shark - Radio Setup Options; Channel Name Display and Editing

6.7 Radio setup
Under Radio Setup submenu, there are 4 items that user can alter settings.
BACKLIGHT
CONTRAST
GPS / TIME
>RADIO SETUP
>CH NAME
RING VOLUME
BEEP VOLUME
INT SPEAKER
6.7.1 Channel name display and editing
To set the channel name to ON or blank on the first line. Maximum of
12 characters could be set for channel name. channel name also allows to edit. The ways
same as Buddy List edit procedures.
6.7.1.1 Channel name display
1 Select RADIO SETUP then CH NAME, then DISPLAY NAME
2 Select ON (on) or OFF (off) as desired, this is example, select on and press
the CH knob the screen shows the channel name.
CH NAME
>DISPLAY
CH INFO
DISPLAY
>ON
OFF
6.7.1.2 Channel name editing
1 Select RADIO SETUP then CH NAME, then CH INFO, press the CH knob the
screen shows the channel name and EDIT and DELETE.
2 Select EDIT and press the CH knob to edit the existing name tag, Input the
new name over the existing name and press the CH knob to display the
YES/NO conformation
3 Press the CH knob to confirm the new channel name, then press cancel to
return t o the menu.
CALLING
DISLPAY NAME
>CH INFO
EDIT CH NAME
>YES
OFF
34