POLMAR Shark - Send a group Call; Make a routing call (individual); Manually Sending an Individual Call

23
3 Once the call is sent, the text area of the display momentarily shows the Cal
-
ling All Ships message. And then the radio returns to normal VHF operation
on channel 16 with high power. Press PTT to talk
5.2.3 Send a group Call
This feature allows the user to contact a group of specific vessels using DSC
and to automatically switch to a desired channel. Before sending a GROUP
call, you must be set the GROUP MMSI
1 From the DSC/MENU select the GROUP CALL item. Press the CH key, the
screen displays the names of your groups.
2 Select the group that you want to call, then select the channel Press the CH
knob to send a group call, Once the call is sent, the Text area of the display
momentarily shows the Calling group message.
SELECT GROUP
> BBLIA
CHAIRIST
SEAWATCH
BBLIA
ID202007003
>SELECT CH
PRESS ENTER
3 After the GROUP CALL is transmitted, the radio will return to normal VHF with
the designated channel.
4 Press the PTT to start talk.
BBLIA
ID202007003
>SEND
CANCEL
PILOTAGE
21’22.0012N
120’40.1001E
10:15 UTC
5.2.4 Make a routing call (individual)
You can make an individual call, either to a ship or to a boast station.
5.2.4.1 Manually Sending an Individual Call
1 Press DSC /MENU to DSC mode, then select “NEW CALL”. Press the CH
knob The arrow is pointing to <MANUAL>
>LAST CALL
NEW CALL
GROUP
ALL SHIPS
><MANUAL>
FINITISIC
INSLAND
ALICESS
MANUAL IND
ROUTINE
ENTER MMSI:
ID - -- - - - - - --