33
6.6.2.2 Time display on/off
You can to turn on/off the time displayed at the normal mode
1 Select GPS/TIME then SETTINGS, then TIME DISPLAY
2 Select ON(on) or OFF(off)as desired, in this example, selected and the screen
no longer shows the time
POS DISPLAY
>TIME DISPLAY
TIME OFFSET
TIME FORMAT
TIME DISPLAY
ON
> OFF
COAST GUARD
27045.1234N
112036.5678W
6.6.2.3 Local time (time offset)
You can set the add/subtract value from UTC time to equal to local time. When offset value is
added, the time will be displayed as LOC instead of UTC
First to set the offset direction + or – and then value in ½ hr. step. The updatad result will be
displayed immediately
TIME OFFSET
>+1.5 HRS
10:56AM LOC.
6.6.2.4 Time format options (time format)
You can choose display time in 12 hr or 24 hr format.
TIME FORMAT
>12 HR
24 HR
10:56AM LOC.
6.6.2.5 Course/speed display options (cog/sog)
You can enable COG (Course over Ground) and SOG (Speed over Ground) displayed on
normal mode.
If the TIME display is turn ON, COG/SOG will be turned off automatically, since it share the
same bottom line for display.
COG/SOG?
>ON
OFF
DISTRESS
27°34.1268 N
102°55.5587 W
356° 12.6Ks
To Next Page
Loading...
