24
2 Press the CH knob again access manual enter ID screen, enter the MMSI
number, when MMSI entry is complete, press the CH knob to accept the
selection
3 Then rotate the CH knob to select the working channel and press the CH
knob to accept select.
(Only in the case of a call to a ship, it is permitted to enter a talk channel; a
call to a coast station, the coast station will specify the channel to talk on in
its acknowledgement.)
4 The radio summarizes the call details and ask for confirmation to send the
call (send?).
Press the CH knob again to send the call. Once the call is sent, the Text area
of the display momentarily shows the Calling message., then display a awai-
ting acknowledgment.
450078964
IND ROUTINE
>SELECT CH
PRESS ENTER
450078964
IND ROUTINE
>SEND
CANCEL
450078964
INDIVIDUAL
ROUTINE
AWAITING ACK
5 If the call is acknowledged, press PTT to talk
6 If the call does not get with in 16 seconds, the radio prompts you to resend
the call.
RETRANSMIT
IND ROUTINE
>SEND
CANCEL
DISTRESS
21’22.0012N
120°40.1001E
10:15 UTC
5.2.4.2 Sending an Individual Call (MMSI stored in Buddy list)
1 Press DSC /MENU to DSC mode, then select “NEW CALL”. Press the CH
knob, the arrow is pointing to <MANUAL>
2 Rotate the CH knob select the person of the Buddy list that you want to call.
The operation procedures are as same as the manual sent an individual
call.
To Next Page
Loading...
