POLMAR Shark - Receiving Group Call; Receiving Individual Call; Receiving a position relay call; Receiving Geographic Area Call

5.3.5 Receiving an group call
1 When an group Call is received, the Alarm Tone Sounds, the radio auto-
matically tune to the designated Channel, and Press any key to disable the
alarm.
2 Monitor the traffic channel for an announcement from the calling ship.
3 The call data is stored in the CALL LOG
GRP ROUTINE
FINISHER
FROM
ID987654322
5.3.6 Receiving an individual call
1 When an Individual call are received, the Alarm Tone Sounds The radio
automatically tunes to the channel designated in the DSC signal,
2 The MMSI contained within the signal are displayed on the Text Area of the
display. If the MMSI correlates to an MMSI stored in the Buddy List, the cor-
responding name is displayed in place of the MMSI.
3 The DSC signal data is stored in the Call Log.
5.3.7 Receiving an “position relay” call
1 When “Position Reply” received, the Alert tone sound and the “POS Recei-
ved” message on 1st line and display the sender GPS data.
2 The time & position could not be stored but able to output to the NMEA port
for external Chart-plotter.
3 Last Rx call information is stored in the position of menu “LAST RX”
5.3.8 Receiving a geographic area call
A geographic area call are received by vessels by within a specific geo-
graphical boundary area.
1 When you receive notification of a geographical call, press any key to can-
cel the alert. The radio automatically selects the channel designated in the
incoming call. The time and the user MMSI are displayed on the screen and
the call data is stored in the call log
2 Monitor the working channel for an announcement from the calling vessel.
28