POLMAR Shark - Maintain Groups

6.8.2 Maintain groups
You can program up to three group MMSI numbers and associated Group names, group
MMSI numbers always begin with a zero (0). You only enter the last 8digits of the group ID
number, the intial”0” is automatically entered.
6.8.2.1 Enter your groups
1 Select GROUP MMSI and press the CH knob. If an existing names & MMSI
data are stored, the values appear.
If is blank, the dash appear on LCD
2 The entry procedures are same as that of the BUDDY LIST.
37
DSC SETUP
USER MMSI
>GROUP MMSI
INDIV REPLY
USER GROUP
> - - - - - - - -
- - - - - - - - -
- - - - - - - -
GROUP NAME
> - - - - - - - - - -
GROUP MMSI
IDO - - - - - - - - -
6.8.2.2 Edit user groups
1 Select DSC SETUP then GROUP MMSI and press the CH knob. The existing
names & MMSI data are displayed on screen. Select the Buddy name or,
only the MMSI that you wanted
2 Press the CH knob to edit. The entry procedures are same as that of the BUD-
DY LIST
3 when the edition is finish press the CH knob to store the changes and return
to the GROUP MMSI screen.
USER GROUP
>EILEEN
CHANG
FRIENDS
EILEEN >EDIT
DELETE
EDIT NAME:
>EILEEN
MMSI:
ID053421608
6.8.2.3 Delete a group
1 Select GROUP MMSI and press the CH knob. The existing group names are
displayed on screen
2 Select that you wanted delete and press the CH knob will display EDIT or
DELETE item
3 Select DELETE and press the CH knob will display DELETE GROUP menu
arrow point the YES, then press the CH knob to empty the group and return
to the USER GROUP screen. The LCD displays the group for > - - - - -- - -.
EILEEN
EDIT
>DELETE
DELETE GROUP
EILEEN
>YES
NO
USER GROUP
> - - - - - - -
CHANG
FRIENDS