6.3.1 Adding an Entry
Use CH knob entry name and MMSI. To use the CH knob enter way as follow:
1 Select Buddy List and the cursor is at <NEW> press CH knob entry page
which prompt up to allow enter Name and MMSI.
2 Rotate the CH knob to select the first desired character (A-Z, 1-9, Space and
Back Arrow “<”) for the name. When the desired character is shown, push
the CH knob to enter, the next characters select all the same, The characters
can be up to 12. When the last digit is entered, the activation advances to
the first MMSI digit.
3 Enter the MMSI associated with that Buddy name (this must be numeric) Prefix
00 will treat as Coast Once 9 digit be entered, pops up a new page to ask
for confirmation to save.
4 Press the CH knob to save the new entry, which is displayed at the top of your
BUDDY LIST.
5 Press CANCEL will terminate the process without saving go back to Buddy list
page.
6 When the Buddy list is full. you cannot make a new entry until you have de-
lectd an existing entry.
6.3.2 Edit Existing Entry
1 Pick up one from Buddy list and edit Press CH knob one Page pops up item
for you to edit or delete, Choose EDIT.
2 when you are finished editing. Press CH knob into a new page prompt in to
ask for confirmation to save.
3 Press the CH knob to save the new edit. The Buddy list is displayed again. If
more changes are required repeat steps1thru 3 otherwise, press cancel to
exit.
6.3.3 Delete an entry
1 Select the one which you want to delete from the list.
2 rotate the CH knob to select the delete option.
3 press and hold the he CH knob to confirm the delete action.
4 the selected record will be removed and go back to BUDDY list page. You
can repeat steps from 1to 4 to delete more records, or press cancel to exit.
30
To Next Page
Loading...
