Polycom® RealPresence Collaboration Server 800s Getting Started Guide
2-12 Polycom, Inc.
2 Click Next.
3 Enter the required Routers information in the dialog box.
4 Click Next.
• To set the Collaboration Server to Secured Communication, first complete the Fast Configuration
Wizard and reset the Collaboration Server. After Login, install the Certificate and then enable
Secured Communication Mode.
• The IP Network Service configured using the Fast Configuration Wizard will be saved only if
Media cards are installed in the Collaboration Server.
Table 2-3 Fast Configuration Wizard – Routers
Field Description
Default Router
IP Address
Enter the IP address of the default router.
To Next Page
Loading...
