Chapter 2-First Time Installation and Configuration
Polycom, Inc. 2-13
5 Enter the required DNS information in the dialog box.
6 Click Next.
Table 2-4 Fast Configuration Wizard – DNS
Field Description
MCU Host Name Enter the name of the MCU on the network.
Default name is Polycom MCU.
DNS Select:
• Off – if DNS servers are not used in the network.
• Specify – to enter the IP addresses of the DNS servers.
Note: The IP address fields are enabled only if Specify is selected.
Register Host Names
Automatically to DNS
Server
Select this option to automatically register the MCU Signaling Host
with the DNS server.
Local Domain Name Enter the name of the domain where the MCU is installed.
Primary DNS Server
IP Address
The static IP address of the primary DNS server.
To Next Page
Loading...
