Linking Multiple SoundStructure Devices with OBAM
7 - 11
Uploading the Configuration
To upload a configuration to the SoundStructure system, open the configura-
tion file within SoundStructure Studio. Select the ‘Connect to Devices’ option
and find the SoundStructure system to receive the configuration file as shown
in the following figure.
Any detected SoundStructure systems may be expanded to show the individ-
ual devices that are part of the system by clicking the “+” sign next to the
system name. The result will appear as shown in the following figure.
To send the configuration file to the SoundStructure system, select ‘Send con-
figuration to devices’ and press ‘Connect’.
To Next Page
Loading...
