Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
9 - 32
Volume Knob Adjusts “Amplifier” Fader
In this example, a volume knob will be used to control volume of an output
named “Amplifier”.
Step 1: Add the analog logic input
In this example a single Analog Logic Input was created and named this logic
input Volume Knob.
Step 2: Create the event that will map the volume knob to the fader
In this example, the event maps the volume knob value to the fader of the
“Amplifier” channel.
To Next Page
Loading...
