Polycom SoundStructure C16 User Manual

The SoundStructure VoIP Interface
12 - 35
To save the settings select the save button on the bottom of the screen. Your
changes may be viewed by selecting View Modifications prior to selecting
Save.
Registering Lines with the SoundStructure VoIP Interface
To register one or more lines of the SoundStructure VoIP Interface with the call
management platform, you need to supply the IT/Phone system administra-
tor with the MAC address of the SoundStructure VoIP Interface and in return
the IT/Phone system administrator will provide the SIP server IP address and
line registration information including login credentials required to register
with to the SIP server.
Boot Server Type IP Address When the Boot Server parameter is set to Custom, this
parameter specifies the type of DHCP option in which
the SoundStructure VoIP Interface will look for its boot
server. The IP Address must specify the boot server.
String The string must match one of the formats described for
server address.
Option 60 Format RFC3925 binary Vendor identifying information in the format defined in
RFC 3925 which can be found at:
Vendor-Identifying Vendor Options for Dynamic Host
Configuration Protocol version 4.
For more information, refer to Technical Bulletin 54041:
Using DHCP Vendor Identifying Options With Polycom
Phones.
Note: DHCP option 125 containing the RFC 3295 for-
matted data will be sent whenever option 60 is sent.
Note: DHCP option 43 data is ignored.
ASCII string
Vendor identifying information in ASCII.
Note: DHCP option 125 containing the RFC 3295 for-
matted data will be sent whenever option 60 is sent.
Note: DHCP option 43 data is interpreted as encapsu-
lated DHCP options and these will take precedence
over options received outside of option 43.
Name Possible Values Description

Polycom SoundStructure C16 Specifications

General

Brand	Polycom
Model	SoundStructure C16
Category	Conference System
Language	English