Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
8 - 28
The recorder has the following features as shown below.
Once recorded, the presets are available for review and manual editing in the
Presets page.
Reordering Entries In A Partial Preset
The order of execution of the commands in a partial preset may be adjusted by
changing the order of the lines in the partial preset. To move a line, select the
line and select the up or down arrow as shown in the following figure.
Start
Recording
Redo last
command
Pause
Recording
Stop
Recording
Last command
recorded
Undo last
command
Starting
Preset
Number of
commands
Control Description
Start Recording All UI interaction after starting the
recording will be stored to a partial preset.
Pause Recording Temporarily stops recording commands.
Stop Recording Finishes the partial preset recording.
Starting Preset You can either record a new preset or
append to an existing preset depending
on the value of this field
Redo Last Command Redoes a command that was undone with
the Undo button.
Undo Last Command Undoes the last command recorded so it
is not part of the preset.
Last Command Recorded Shows the last command that was
recorded.
Number of Commands Shows the number of commands that
have been recorded with the partial
preset.
To Next Page
Loading...
Need help?
General
