Polycom SoundStructure C16

Command Protocol Reference Guide
A - 39
matrix_gate Enable Gated Signal At Crosspoint
Description
This parameter selects whether the gated (1) or ungated (0) version of the input
signal is sent to the output.
Examples
get matrix_gain "Table
Mic 1" "Phone Out"
val matrix_gain "Table
Mic 1" "Phone Out" 3
Queries the matrix crosspoint gain from input "Table Mic
1" to output "Phone Out".
Argument Argument value
Channel Type Matrix
Value Type Boolean
Read/Write Mode Read/Write
Row Phys Chans Conferencing Mic/Line Input, Sound Reinforcement Mic/Line
Input
Row Virt Chans Mono, Stereo
Col Phys Chans
Conferencing Line Output, Sound Reinforcement Line
Output, Analog Telephony Output, Submix, ConferenceLink
Aux Output
Col Virt Chans Mono, Stereo
Default 0
Event Source No
Command Response Description
set matrix_gate "Table
Mic 1" "Phone Out" 1
val matrix_gate "Table
Mic 1" "Phone Out" 1
Tells the matrix to use the automixed version of the input
signal "Table Mic 1" when creating the output signal
"Phone Out".
set matrix_gate "Table
Mic 1" "Phone Out" 0
val matrix_gate "Table
Mic 1" "Phone Out" 0
Tells the matrix to use the un-automixed version of input
"Table Mic 1" when creating the output signal "Phone
Out".