Command Protocol Reference Guide
A - 63
Description
This parameter returns manufacturing and hardware information about the
VoIP plug-in card.
voip_bootrom_sw_ver
Get Bootrom Software Version
Description
This parameter returns manufacturing and hardware information about the
VoIP plug-in card.
voip_call_appearance
Select the Active Call Appearance
Description
This parameter selects the currently active call appearance. Some parameters
(e.g. phone_connect, phone_dial, phone_redial) operate on the currently
active call appearance, as specified by this parameter. Setting this parameter is
analogous to selecting a call appearance on the UI of a Polycom VoIP phone.
VoIP plug-in card.
Argument Argument value
Channel Type Virtual Channel
Value Type String
Read/Write Mode Read-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
System Limits Max String Length: 256
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Sequence
Read/Write Mode Read/Write
Phys Chans VoIP Telephony Output
Virt Chans Mono
System Limits Minimum: 1, Maximum: 24
Default 1
Event Source No