Command Protocol Reference Guide
A - 69
Description
This parameter is used to select between number dialing and SIP URL dialing.
Whenever the phone_connect parameter for a voip_out channel changes from
1 to 0, the voip_dial_mode parameter shall be reset back to number. An auto-
matic status message shall be generated when this happens.
voip_dnd
Enable or Disable Do-Not-Disturb Model
Description
This parameter enables (1) or disables (0) do-not-disturb mode on the VoIP
plug-in card.
voip_eth_settings
VoIP Interface Ethernet Settingsl
Virt Chans Mono
Values number : Number (digit) dialing (default)
url : SIP URL dialing
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans VoIP Telephony Output
Virt Chans Mono
Default 0
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type String
Read/Write Mode Read/Write
Phys Chans VoIP Telephony Input
Virt Chans Mono
To Next Page
Loading...
Need help?
General
