Command Protocol Reference Guide
A - 71
Description
This parameter sets the VLAN ID for the VoIP card. A value of -1 corresponds
to "disabled."
voip_factory_reset
Reset VoIP Interface to Factory Statel
Description
This parameter resets the VoIP plug-in card to its factory state.
to "disabled."
voip_forward
Forward a Calll
Phys Chans VoIP Telephony Input
Virt Chans Mono
System Limits Minimum: -1, Maximum : 4096
Default -1
User Limits
Supported
No
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Input
Virt Chans Mono
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only