Polycom SoundStructure C16

Command Protocol Reference Guide
A - 73
voip_line Select the Active Linel
Description
This parameter selects the currently active line. Some parameters (e.g.
phone_connect, phone_dial, phone_redial) operate on the currently active
line, as specified by this parameter. Setting this parameter is analogous to
selecting a line key on the UI of a Polycom VoIP phone.
voip_line_label Label for the Line Keyl
Description
This parameter reports the label for the specified line.
Argument Argument value
Channel Type Virtual Channel
Value Type Sequence
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
System Limits Minimum: 1, Maximum: 12
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type String
Read/Write Mode Read-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
Indices 1-12 : Line number
System Limits Max String Length: 128
Event Source No