Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 96
Description
This parameter sets the bandwidth (in octaves) of the specified parametric
equalizer band. In the case of peaking filters, this is the bandwidth at which the
gain is half the peak gain (in dB). For notch filters, this is the 3 dB bandwidth.
For all-pass filters, this is the bandwidth at which the phase shift is +/- 90
degrees. For conference link physical channels, the band index must be
between 1 and 5. For all other physical channels, the band index must be
between 1 and 10.
peq_frequency
Frequency Of Parametric Equalizer Band
Phys Chans
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
Indices 1-10 : Equalizer band
System Limits Minimum: 0.05, Maximum: 2.0, resolution: 0.01
Default 0.5
User Limits
Supported
No
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
Indices 1-10 : Equalizer band
System Limits Minimum: 20.0, Maximum: 20000.0, Resolution: 0.1