Command Protocol Reference Guide
A - 99
Description
This parameter enables (1) or disables (0) all the dynamics processing for the
specified virtual channel.
dp_gate_attack
Gate Attack Time
Description
This parameter sets the amount of time (in milliseconds) it takes the dynamics
gate to ramp the gain up to the target gain once the input signal level surpasses
the gate threshold. This parameter does not affect the automixer processing.
Phys Chans
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
Default 0
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: 1, Maximum: 200
Default 1
User Limits
Supported
No
Event Source No
To Next Page
Loading...
Need help?
General
