Polycom SoundStructure C16 User Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 102
Description
This parameter sets the ratio of the target gain applied by the dynamics gate
versus the difference between the input signal level and the gate threshold. For
example, if the dynamics gate ratio is 10 (i.e., 10:1) and the input signal level is
6 dB below the gate threshold, the gate applies -60 dB of gain. This parameter
does not affect the automixer processing.
dp_gate_thresh Gate Threshold
Description
This parameter sets the RMS level (in dBFS) of the input signal below which
the dynamics gate engages. The level must be below this threshold longer than
the gate hold time (set by dp_gate_hold) before the gate begins to apply a gain
change. This parameter does not affect the automixer processing.
System Limits Minimum: 1.0, Maximum:100.0, Resolution: 0.1
Default 100.0
User Limits
Supported
No
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-point
Read/Write Mode Read/Write
Phys Chans
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: -100.0, Maximum: 0.0, Resolution: 0.1
Default -100
User Limits
Supported
No
Event Source No

Polycom SoundStructure C16 Specifications

General

Brand	Polycom
Model	SoundStructure C16
Category	Conference System
Language	English