Polycom SoundStructure C16

Command Protocol Reference Guide
A - 139
Description
This parameter specifies the amount of time (in milliseconds) that a GPIO pin
must be held for the first digital_gpio_held status message to be sent. Setting this
parameter to 0 indicates that digital_gpio_held messages will not be generated.
digital_gpio_repeat_time Digital GPIO Pin Repeat Time
Description
This parameter specifies the amount of time (in milliseconds) between
digital_gpio_held status messages when a GPIO pin is continually held.
digital_gpio_state Digital GPIO Pin Status
System Limits Minimum: 0, Maximum: 10000
Default 0
User Limits
Supported
No
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Digital General Purpose I/O Input
Virt Chans Control
System Limits Minimum: 1, Maximum: 10000
Default 1000
User Limits
Supported
No
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write