Polycom Trio Visual+

Hardware and Accessories
Polycom, Inc. 152
features.cfg mr.pair.tls.enabled 1 (default) - Use TLS to
communicate between Polycom
Trio 8500 or 8800 and Polycom
Trio Visual+ systems.
0 - Does not use TLS to
communicate between Polycom
Trio 8500 or 8800 and Polycom
Trio Visual+ systems.
No
features.cfg mr.pair.uid.1 Enter the MAC address of the
Polycom Trio Visual+ you want
to pair with.
Null (default)
String (maximum of 64
characters)
No
features.cfg mr.PairButton.notification 0 (default) - The Polycom Trio
8500 or 8800 system is notified
when you press the Pair button
on the Polycom Trio Visual+.
1 - The Polycom Trio 8500 or
8800
system is not notified when you
press the
Pair button on the Polycom Trio
Visual+.
No
features.cfg mr.video.camera.focus.auto 0 (default) - Disable the camera's
automatic focus.
1 - Enable the camera's
automatic focus.
No
features.cfg mr.video.camera.focus.rang
e
Specify the distance to the
camera's optimally-focused
target.
0 (default)
0 - 255
No
features.cfg mr.video.iFrame.minPeriod Choose the minimum time in
seconds between transmitted
video i-Frames or transmitted
i-Frame requests.
2 (default)
1 - 60
No
Pairing Parameters
Temp l at e Parameter Permitted Values Change Causes
Restart or Reboot