parameters are not saved in non-volatile memory until a PRESETW command is executed. Parameters
stored in the power-on preset (see
PRESETP) are restored when the power is cycled.
Command Storage Description
AA
Preset Enable or Disable Auto Answer Mode
ACKMOD
Global Enable or Disable Acknowledgment Mode
AGC
Preset Enable or Disable Mic/Line Input Automatic Gain Control
AGCMAX
Preset Set Maximum Allowed Mic/Line Input AGC Gain
AGCMIN
Preset Set Minimum Allowed Mic/Line Input AGC Gain
AGCRATE
Preset Set Ramp Rate of Mic/Line Input AGC
AHCP
Preset Enable or Disable Call Progress Based Auto Hangup
AHLD
Preset Enable or Disable Loop Drop Based Auto Hangup
AMNOMAT
Preset Select NOM Attenuation on Each Output
BAUD
Global Set Baud Rate for RS-232 Port
BLAUTO
Preset
Enable Automatic BLDATA Messages
BLDATA
- Request Level Information
BLINFO
Preset
Select Information to be Reported in BLDATA
BROAD2
- Broadcast Arbitrary Command Strings to RS-232 Port
BROADA
- Broadcast Commands to Other Connected Devices
COUNTRY
Global Specify Country Definitions for Phone Interface
DELAYO
Preset Set Output Delay
DELAYOE
Preset Enable Output Delay
DIAL
- Send DTMF Digits to Phone Interface
DSPAUTO
-
Enable Automatic DSPLOAD Status Messages
DSPLOAD
- Query Percentage of Variable DSP Resources Used
ERROR
Global Enable or Disable Error Messages
FADERI
Preset Set Input Gain Fader
FLASH
- Execute Hook Flash
FLOW
Global Set Flow Control Mode for RS-232 Port
FPLOCK
Global Lock/Unlock Front Panel
FPPSWD
- Change Front Panel Password
GAINA
Preset Set Phone Input Gain
GAIND
Preset Set Gain of Incoming DTMF Tones
GAINDIT
Preset Set Gain of Incoming DTMF Tones
GAINDT
Preset Set Dial Tone Gain
To Next Page
Loading...
Need help?
General
Weight and Dimensions
