2 Your balance ■
15
2.3 Data and parameters
The balances of Series XB are divided into five main-groups A, C, D,
G and M. The letter in the name corresponds to the design
specification (e.g. A = analytical balance, M = MilIigramme balance)
the number before it corresponding in each case to the maximum
allowable load (in grammes).
The allowable weighing range, the calibration value and the readability
of the balance are printed on the casing (see Tab. 2.1 List of appliance
labels) and are therefore not presented here.
2.3.1 Technical data
• XB-A (e.g. XB 120 A)
– with closed glass-cover “BASIC” as standard
– round weighing pan,
∅ 80 mm
– Fluorescent-Display
• XB-M (e.g. XB 620 M)
– with windshield “simple” as standard
– square weighing pan, 135 x 135 mm
– Fluorescent-Display
– also available as Floating-Range version
• XB-C (e.g. XB 1200 C)
– square weighing pan, 170 x 170 mm
– Fluorescent-Display
– also available as Floating-Range version
– also available with dust and water splash protection to IP65
• XB-D (e.g. XB 3200 D) and XB-G (e.g. XB 10200 G)
– square weighing pan, 200 x 200 mm
– Fluorescent-Display
– also available as Floating-Range version
01,00,P04 E01
Firmware: E01-0100.P04
- E01: Hardwarecode Exx-
- 01,00: Version
- P04: Release
Display Remark
To Next Page
Loading...
