Precisa 320 XT - Selection of an Application Program; Setting for Counting by Weighing

10 Practical examples ■
61
10.2 Selection of an application program
See Chapter 4.5.2 “Activating the application menu” for the activati-
on of the application menu.
10.2.1 Setting for Counting by weighing
For Setup, see Chapter 6.5 “Application “COUNT””
To count uniformly heavy objects such as coins, screws or similar
things, proceed as follows:
PASSWORd 7900
•Press «MODE» until the second
digit flashes. Enter the second
digit by briefly pressing «MODE»
repeatedly.
PASSWORd 7914
• In the same way enter the third
and fourth digit of the password.
• Hold down «MODE» until input is
complete (no digit flashing).
DATA-PROTECTION OFF
•Press «MODE» briefly. “DATA-
PROTECTION ...” will appear.
•Press «MODE» repeatedly, until
the desired data-protection is
displayed (the setting will flash).
new PASSWORd 7914
•Press «MODE» and hold down
button until “NEW PASSWORD
7914” appears.
• Release the «MODE»-button.
new PASSWORd 1234
• Your own new password can now
be entered in a similar manner to
the foregoing.
PASSWORd ––––
•Press «PRINT» to return to
“PASSWORD ––––”.
•Press «PRINT» to exit menu.
SET APP. . . .
•Press «MODE» and hold down
button until the currently set ap-
plication appears.
• Release the «MODE»-button.