Precisa 320 XT - Remote Control Commands

8 Data transfer to peripheral devices ■
55
8.2 Remote control-commands
Command Function
ACKn Handshake n=0 off; n = 1 on
CAL Start calibration (only where INT or EXT selected)
DN Reset weight display
D.......... Describe weight display (right-aligned)
@N Reset Info display
@......... Describe Info display
In Set FLOATINGDISPLAY time n=0 t=0.04 s
n=1 t=0.08 s
n=2 t=0.16 s
n=3 t=0.32 s
N Reset balance
OFF Switch off balance
ON Switch on balance
PCxxxx Enter anti-theft code
PDT Print out date and time
PRT Print function (like pressing the “Print” key)
PST Print status report
Pn (ttt.t) Set print mode
n=0 Individually print each value (unstable)
n=1 Individually print each value (stable)
n=2 Print after change of load
n=3 Print after each integration period
n=4 Print on time basis in s (ttt.t)
R%k Set current weight=100%
with k=0...7 decimal places (k=A: use automatic
positioning of decimal point)
REF%k rrr... Set reference weight rrr... for 100%
with k=0...7 decimal places (k=A: use automatic
positioning of decimal point)
Rnnn Set current weight=nnn items
REFrrr... Set reference weight rrr... for 1 item