Precisa 320 XT - Date, Time, Password, and Theft Code

5 Working with the configuration menu ■
37
With the aid of the interface functions, the RS232/V24 interface of
the balance is matched to the interface of a peripheral device (see
Chapter 8 “Data transfer to peripheral devices”) as well as
Chapter 5.12 “Precisa BUS”.
5.8 Date and time
To activate the menu see Chapter 4.5 “Activating the two main me-
nus” and Chapter 4.6 “How the menu control operates”.
5.9 Password protection
To activate the menu see Chapter 4.5 “Activating the two main me-
nus” and Chapter 4.6 “How the menu control operates”.
The password protection permits you to protect the application menu
•SET
DATE AND TIME
DATE [DD.MM.YY]
TIME [HH.MM.SS]
FORMAT STANDARD/US
Set date and
time
NOTE
These settings are only available if the clock is installed.
The date and time display continues in the event of a power failure.
If this is not the case, the balance backup battery is exhausted and
must be replaced by the customer service.
• PASSWORD
PASSWORD
––––
DATA-PROTECTION OFF
DATA-PROTECTION MED
DATA-PROTECTION HIGH
No protection
The configuration menu
is protected
The configuration menu
and the application
menu are protected
NEW PASSWORD –––– Enter new password