Precisa 320 XT - Print Function and Calibration Settings

5 Working with the configuration menu ■
33
5.4 Print functions
To activate the menu see Chapter 4.5 “Activating the two main me-
nus” and Chapter 4.6 “How the menu control operates”.
With “SET PRINTFORMAT”, elements which are switched on are prin-
ted in each case:
• With “UNITS” all momentarily active units are printed out,
• with “PRODUCT ttt...” the product name can be entered
alphanumerically,
•SET
DATA
PRINT
AUTO-START ON/OFF Start print automatically on
switching on/off
MODE UNSTABLE Individual print, each value
MODE STABLE Individual print, stable value
MODE LOADCHANGE Print after load changes
MODE CONTINUOUS Continuous print after every
lntegration time
MODE TIMEBASE Continuous print with time
basis
TIMEBASE 2.0 Time basis (in seconds) freely
selectable
SET PRINTFORMAT DATE AND TIME ON/OFF
BALANCE-ID ON/OFF
PRODUCT-ID ON/OFF
GROSS AND TARE ON/OFF
UNITS ON/OFF
OPERATOR-ID ON/OFF
LINEFEEDOFF/1/../FORMFEED
PRODUCT ttt...
PRODUCTMODE HOLD
PRODUCTMODE DELETE
PRODUCTMODE COUNT
OPERATOR ttt...