Precisa 320 XT - Setting the Print Functions; Activation of Password Protection

■ 10 Practical examples
60
10.1.3 Setting the Print functions
In order to alter the print parameters proceed as follows:
•Press «MODE» again and hold down the button until the next print
function appears. Change the setting in the same way.
•Press «PRINT» to return to “SET DATA PRINT”.
•Press «PRINT» again to exit menu.
10.1.4 Activation of password protection
The possibilities for setting the password protection are described in
Chapter 5.9 “Password protection”.
In order to activate password protection, proceed as follows:
SET DATA PRINT
•Press «MODE» and hold down
until “SET DATA PRINT” appears.
• Release the «MODE»-button.
AUTO-START OFF
•Press «MODE» briefly. “AUTO-
START ...” will appear.
AUTO-START on
•Press «MODE» repeatedly, until
the desired setting is displayed
(ON or OFF will flash).
mODE STABLE
•Press «MODE» and hold down the
button until the next print
function appears (“MODE ...”).
• Release the «MODE»-button.
MODE TIMEBASE
•Press «MODE» repeatedly, until
the desired setting is displayed.
PASSWORd ––––
•Press «MODE» and hold down
button until “PASSWORD ––––”
appears.
• Release the «MODE»-button.
PASSWORd 7000
•Press «MODE» briefly. The first
digit of the password will flash.
• Enter the first digit by briefly pres-
sing «MODE» repeatedly.