■ 6 Working with the application menu
46
The balance measures continuously throughout the period defined by
the user in the Setup menu, averages the stored values at the end of
the measuring period and displays average-measurement thus
obtained.
Functions of the application:
Operation:
Start the application (see Chapter 6.3 “Changing application / weigh-
ing mode”).
• Place the animal on the weighing pan.
•Press the «REF»-button until the desired function appears on the dis-
play.
• Release the «REF»-button.
6.9 Application “DENSITY”
See Chapter 4.5 “Activating the two main menus” and Chapter 4.6
“How the menu control operates” for the activation of the Application
menu.
«MANUAL»: - Manual release of the measurement.
«AUTO»: - Start automatic release of the measurement with a
second delay after each load-change.
«STOP»: - Stop automatic measurement.
•SETUP
APPLICATION
DENSITY MODE SOLID ON BOTTOM
MODE SOLID IN AIR
MODE LIQUID
MODE SOLID POROUS
Solid body
Solid (under-floor)
Measure liquids
Solid porous bodies
INDEX ON/OFF Index on/off
TIMEBASE 0.0 Time base for repeat
in seconds
REF. DENSITY 0.9988205 Density of the liquid
used for the measure-
ment (set at works for
water at 20°C)
To Next Page
Loading...
