■ 10 Practical examples
62
By briefly depressing the «MODE»-button you can change to
“COUNT”.
Place the set number of objects on the weighing pan. The reference
weight for the count will be defined by briefly depressing the «REF»-
button.
SET APP. count
•Press «MODE» repeatedly, until
“SET APP. COUNT” is displayed
(the application will flash).
•Press «PRINT» to confirm the
input.
SETup APPlication
•Press «MODE» until “SETUP AP-
PLICATION” appears.
• Release the «MODE»-button.
Reference 10 pcs
•Press «MODE» briefly, the cur-
rently set reference quantity ap-
pears.
• Release the «MODE»-button.
Reference 010 pcs
•Press «MODE» briefly. The first
digit of the reference quantity will
start to flash.
• Enter the first digit by briefly pres-
sing «MODE» repeatedly.
Reference 020 pcs
•Press «MODE» until the second
digit flashes. Enter the second
digit by briefly pressing «MODE»
repeatedly.
Reference 025 pcs
• In the same way enter the third
digit of the reference quantity.
• Hold down «MODE» until input is
complete (no digit flashing).
•Press «PRINT» twice to exit
menu.
To Next Page
Loading...
