ON/OFF Circuit Breaker Switch Replacement
About
This procedure provides instruction to replace the ON/OFF Switch Circuit Breaker.
The Power Entry Assembly located in the front of the treadmill under the frame weldment
cross member contains the Power Cord Inlet Assembly, and the ON/OFF Switch Circuit
Breaker assembly. The Power Entry Assembly Bracket must be removed to access these
components.
ID Description
Power Entry Assembly Bracket
Power Cord Inlet Assy
ON/OFF Switch Circuit Breaker
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 102
6 Replacement Procedures
ON/OFF Circuit Breaker Switch Replacement
To Next Page
Loading...
Need help?
General