Note: Multiple repeating instances of the same error code event occurring during
the same hour or odometer reading will only be logged as a single error code
event.
Troubleshooting
Always review the Error Log or CPA Event Log when troubleshooting an issue. The error
logs will contain all current and past error codes from the last log reset. You can then refer to
the Error Code Troubleshooting Guide (Error Code Troubleshooting Guide) to learn about
the error code and information to help resolve the issue.
Note: Be aware that not all machine failures will cause an error code event. Use
physical observation and mechanical troubleshooting skills to resolve non error
code issues.
Error Log
Applies To: LED Consoles (P10, P30, P30i and P31)
Contents
l About, see "About" below
l How to open the Error Log, see "How to open the Error Log:" on the facing page
l Clearing Error Log Codes, see "Clearing Error Codes:" on page 186
About
On LED consoles (P10, P30, P30i and P31), error codes are stored in the Error Log. Error
codes are sequentially shown on the console message display one at a time. The individual
error code data metrics will scroll across the display. Use the Up/Down keys to scroll thru
and view the individual error codes.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 184
7 Troubleshooting
Error Log & CPA Event Log