P30i consoles: Press the PAUSE hardkey and immediately use the INCLINE number
keys to type in the access code.
P80 touchscreen console
Have the service access code ready and then use the following instructions to access the
standard service menu:
Steps
1. Make sure the P80 is set to the Welcome home page.
2. Press and hold the Pause key while pressing CH up >VOL down > VOL up > CH
down:
3. Use the touch keypad to type in the service access code.
P62 and P82 touchscreen consoles
Diagnostics menu access
Have the service access code ready and then use the following instructions to access the
standard service menu:
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 30
4 Standard Service Menus
How to Access the Standard Service Menus
To Next Page
Loading...
Need help?
General