Parts
About
Equipment replacement part numbers are obtained from the Exploded View Diagram and
Parts List documents. The Exploded View Diagram shows a picture of the disassembled
machine parts and assigned bubble number. It is used to show how the machine is
assembled and to identify machine replacement parts and associated bubble number. The
Parts List is basically a part number look up table that uses the part bubble number to find
the Precor part number.
How to find the machine Precor part number:
l First use the machine Exploded View Diagram to identify a machine replacement part
and the associated bubble number.
l Then go to the Parts Identification List and use the part bubble number to obtain the
Precor part number.
The service manual includes PDF copies of the equipment Exploded View Diagram and
Parts Identification List. These documents are primarily intended to be used as a quick ref-
erence when servicing the equipment. However, the service manual may not reflect the
latest equipment part updates. So always refer to the equipment Exploded View Diagram
and Parts Identification List on Precor Connect to obtain the latest part information.
Precor Connect Partner's website
If you have online web access, it is always recommended that you go to the servicer Pre-
cor Connect Partner's website to view the equipment's most current Exploded View Dia-
gram and Parts Identification List information.
How to use Precor Connect to find part Information
1.
Log in to the Precor Connect Partner website.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 251
12 Parts
About
To Next Page
Loading...
Need help?
General