Lift Platform Replacement
About
This procedure provides instruction to remove and replace the Lift Platform.
Procedure
Removal
Review entire procedure before starting.
1. Remove the hood cover, see "Hood Cover Replacement" on page 82.
2. Remove the left/right trim landing covers, see "Trim Landing Covers Replacement"
on page 85.
3. Remove the left and right trim side covers see "Covers and Panels Replacement" on
page 80.
4. Prepare the treadmill for service. This procedure gains access to the lift platform from
the front of the treadmill. However you can alternatively access the lift platform by lay-
ing the treadmill on its side, see "Side access" on page 76.
a. Access the service menu (51765761) and select the INCLINE TEST, see "How
to Access the Standard Service Menus" on page 29. Use the INCLINE control
to set the incline level to 14.
b. Securely and safely place supports (e.g. car jack stands, blocks, etc.) under the
left and right front corners of the frame weldment.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 167
6 Replacement Procedures
Lift Platform Replacement
To Next Page
Loading...
Need help?
General