Operation Verification
17. Reinstall the hood cover, see "Hood Cover Replacement" on page 82., .
18. Verify the treadmill incline operation from minimum to maximum levels. Verify that the
incline reaches maximum and minimum levels and the up/down movement is smooth.
Verify that there are no unusual noises.
19. Review the Error Log and verify that there are no active Incline function related error
codes.
20. Do the Operation Verification tests (see "Operation Verification" on page 23) and
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 166
6 Replacement Procedures
Lift Motor Replacement
To Next Page
Loading...
