Tools and Supplies
Tools and supplies required to complete the machine service and repair.
Tools
• US and Metric Hex Key set • Standard straight slot tip screw drive set
• US and Metric socket set • Philips tip screwdriver set
• Us and Metric wrench set • US & metric Allen wrench set
• Cutters • 7/16” Allen key, socket mounted
• Rubber mallet • Pliers
• Tape measure /Straight edge ruler • Inner and outer snap ring pliers
• DVM meter • Torque
1
Wrenches: 9 in lbs to 100 in - lbs
(83 ft-lbs)
• AC Clamp-on averting current meter • DVM Multimeter
• ESD wrist strap and pad • Compatible HR
2
chest strap or Polar HRM
simulator xmitter (Precor PN:
PPP000000020045101)
• 12 " wonder bar • Vacuum cleaner (recommend ESD safe
model)
• 2 - Running Belt tension gauge – OTC
Tools Model #: 6673 (Precor PN:
PPP000000020007101)
• Drive Belt tension Gauge (Kent-Moore BT-
33-73-F
Supplies
• Super Lube Gel with Teflon by Permatex
(1)
• Cleaning rags
• Loctite 243 Blue Medium Strength Thread-
locker
• Cleaner Degreaser (see "" on page 14)
• Cable tie assortment (1 3/4", 3", 4"
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center
of the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the
bolt.
2
Heart Rate
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 10
2 General Information
Tools and Supplies
To Next Page
Loading...
